PRODUCTS.
MAXX-SERIES
Click here for Inquiry via E-Mail
We will process your quote request as soon as possible.
32 Channels
MA32 are cutting edge 32 channel power amplifier combining FPGA-based signal processing with advanced Class D power stages and universal power supply for global use. They offer the worlds highest channel count per size.
Load Monitoring
The output current of all channels is measured and feed to a 20kHz detector. By adding a pilot tone by either the internal generator or an external source, the connection and voice coil of your speakers can be monitored. Threshold and debounce time is adjustable per channel.
PFC
The use of a PFC (power factor correction) results in a sinusoidal current consumption from the mains. The reduced mains harmonics no longer burden the power grid. Another effect is a much-improved power delivery from unstable mains.
AES3
Both BNC Connectors can be used to receive an AES3-ID stereo signal. It is easily adaptable to AES/EBU by the use of an impedance match transformer like the Neutrik NADITBNC-F.
DANTE™
DANTE™ offers a wide range of compatible products to offer a broad eco-system of ethernet based Audio over IP devices. All 32 channels can be feed by different streams to offer a flexibility which could never be done before.
MADI
The amplifier accepts MADI optical and 2x MADI coaxial as input. Both coaxial connectors are used to have a redundancy by feeding the same signal twice. The amp can switch seamlessly between both, depending on which link carries a valid signal. The inputs can be patched smoothly between all interfaces. All inputs can also be used as the clock source.
AES67
AES67 is an open standard for audio over IP and audio over ethernet interoperability. The standard was developed by the Audio Engineering Society. It is a layer 3 protocol suite based on existing standards and is designed to allow interoperability between various IP-based audio networking systems such as RAVENNA, Livewire, Q-LAN and DANTE™.
COMP
The combination of a clip- and rms-limiter offers the best possibilities to protect your connected speaker. The parameters are adjustable per channel independently.
DELAY
To adjust the timeshift in your speaker system or the acoustic circumstances, every channel can be delayed up to 48000 samples. This gives you more than 1 sec of delay time or in other words approximately 330m of physical offset.
FIR
FIR Filters are a comfortable solution to equalize your speakers or the acoustics of your listening room to a nice and phase linear response. Unlike IIR-Filters, you have the choice to adjust the phase response of the system. We support an easy load of coefficients from a ascii coded file which mostly every design software can export.
IIR
To achieve simple and easy to use filtering, we offer an amount of 32 IIR Filters per channel. These filters can be used to build crossovers and equalize your system.
ETHERNET
The remote control and audio data are carried by the use of Ethernet. This gives you the cheapest and widely used interface. Ethernet is the industry standard in every new installation.
AES70
Web-based remote control makes usability straightforward and platform-independent. We reveal the complete protocol definition for integration in third-party controller. We offer mDNS (Bonjour) to discover devices on your network. IP settings can be changed across IP subnet borders by the use of a simple propriety UDP implementation.
The difference lies in the detail.
Comparison of the amps.
MA32-LP
- Total Power • 640W
- Channels • 32x20W
- Size • 1HE
- Cooling • Noiseless Passive (no Fan)
MA32-D
- Total Power • 8960W
- Channels • 32x280W
- Size • 2HE
- Cooling • FAN (6 fans)
Relatively related to each other.
Similarities Overview of the
MAXX-Series.
- OVERVIEW.
- 32x 280W-4Ω/Ch 1 %THD
32x 140W-8Ω/Ch 1 %THD
2kW Wide Range Power Supply
MADI (AES1 0) Fibre I /O
Dual MADI Coax Redundancy
Coax Input Switchable to AES3
Fibre Transmit DSP Outputs
44.1 kHz/48kHz
Low Jitter DDS Clock
Flexible Input Patchbay
Level Meter - REMOTE CONTROL.
- Web
mDNS Discovery
SNMP
AES70 (OCA)
FTP Server
100% Failsafe Firmware Upgrade - SPEAKER MONITORING (OPT. M1 ).
- Current Measurement
20kHz Generator and Mixer
20kHz and Broadband Detector - PRESETS.
- Complete Amp Config
Channel Config
Selectable parameters to load per preset
Less than 150ms Preset change time
Shadow Preset for modifiying presets - DSP FUNCTIONS PER CH. (OPT. D1 ).
- 5 EQs + High- + Lowpass
Peak-, Shelving-, Allpass- and Notchfilter
High/Lowpass 6-48dB/Oct
Bessel , Butterworth, Linkwitz, Variable Q
Compressor/Limiter
Hard Clip Limiter
Volume
Sample Accurate Delay up to 1s - FIR FILTER (OPT. D2).
- 2048 Tap Filter per Channel
Loadable from ASCII File - AUDINATE DANTE INPUT (OPT. IF1 ).
- 32 Channels at 44.1 kHz/48kHz
Primary- and Secondary Gigabit Interface
